How to use the EMF Test Kit 

SaticShield has created the EMF Test Kit Series scientifically designed to empower anyone seeking to assess the level of dirty electricity in home or office and identify common EMF causing culprits.

To affectively assess, each SaticShield EMF Plus Test Kit includes:

-The SaticShield 'EMI Meter' which will help you to assess the current level of dirty electricity

-An 'Outlet Tester' will detect potential electrical or wiring issues

-A Pure Power Plug-In filter that will demonstrate how the product actively filters, cleans and regulates the power for EMF mitigation

-A Satic Clipboard & LED Pen with EMI reading and recording sheets for logging your findings as well as a comprehensive assessment guide and frequently asked questions

This package leaves you fully equipped to assess and begin mitigating dirty electricity and EMF

SaticShield EMF Test Kit; $299.99
Included Documents

-Demo Kit Instructions

-EMF Meter Recording Sheets

-Satic Product Line FAQ

Instructions for SaticShield EMF Test Kit

    1) Start by finding an empty electrical outlet. Plug the dirty electricity EMI meter into the            upper receptacle. The meter should display under 50 ideally, but certainly under 100.  

 

    2) Now, insert the Pure Power Plug-In (ES120) into the lower outlet and notice the                      difference in your EMI Meter reading.  

 

    3) After that, unplug the Pure Power Plug-In and watch your EMI Meter return to its prior            settings. 

 

    4) Record all the readings from this outlet on one of your EMF Meter Recording sheets.  

Instructions for Comparing Lightbulbs

    1) Unplug Pure Power Plug-In (ES120) & remove from test.

    2) Connect a lightbulb of your choosing to the adapter and insert into lower                      receptacle. 

    3) Record readings displayed on the EMI meter.

    4) Detach lightbulb from adapter and connect SaticPulse LED bulb.

    5) Record readings displayed on EMI meter and compare results.

SaticShield EMF Plus Test Kit; $499.00
Included Documents

-Demo Kit Instructions

-EMF Meter Readings Recording Sheets

-Satic Product Line FAQ

Instructions for SaticShield EMF + Energy Test Kit

    1) Start by finding an empty electrical outlet. Plug the Power Strip into the lower                receptacle.

    2) Plug EMI Meter and Nebulizer into the Power Strip.  

    3) Attach Clamp Amp meter and OWL sensor clamp to exposed hot wire on Power            Strip Cord.

    4) Set up OWL transmitter and display. The OWL-meter with screen should already            be calibrated (paired) for you and ready to go. It is typically set at $0.10 per kWh            but is adjustable for any rate.

    5) Turn on Nebulizer and record readings on all meters on one of your EMF Meter              Recording sheets. 

    6) Plug Pure Power Plug-In (ES120) into bottom outlet of power strip.

    7) Record all readings on EMF Meter Recording sheet. 

Instructions for Comparing Lightbulbs

    1) Unplug Pure Power Plug-In (ES120) & remove from test.

    2) Unplug Nebulizer & remove from test.

    3) Connect a lightbulb of your choosing to the adapter and insert into Power Strip.

    4) Record readings displayed on both meters on EMF Meter Recording sheet. 

    5) Detach lightbulb from adapter and connect SaticPulse LED bulb. 

    6) Record readings on both meters on EMF Meter Recording sheet. 

Contact Us

Contact Information

Satic, Inc.

7151 Kestrel Drive, Suite A

Missoula, MT 59808

Email: info@saticusa.com

Office: 1-406-493-1861

Fax: 1-406-830-3202

Social

See more of what Satic, Inc. is doing online.

  • Facebook - White Circle
  • Instagram - White Circle
  • YouTube - White Circle

© 2020 by Satic, Inc. All Rights Reserved.