Power Perfect Box Installation Instructions
WARNING:
ELECTRICAL SHOCK MAY OCCUR. HAVE YOUR SATIC PRODUCT INSTALLED BY A LICENSED ELECTRICIAN. INSTALLING ELECTRICAL EQUIPMENT CAN RESULT IN SHOCK, SERIOUS INJURY, AND EVEN DEATH.
Locations & Information
-
The Satic Power Perfect Box (PPBOX) is a fully synergistic power conditioner, designed to be installed at the load center (distribution/breaker panel).
​
-
Some homes have multiple breaker panels and the PPBOX can be installed on any breaker panel providing there is space for the dedicated breaker.
​
-
The PPBOX is designed to condition ALL phases of power in the home when installed at the Distribution Panel.
​
-
If there are no spaces available in the breaker panel, a subpanel can be installed for a dedicated breaker.
​
-
The PPBOX MUST be installed on a dedicated two-pole 15 amp breaker. Double-tapping / Piggybacking is against national building codes and may void the warranty.
​
-
The PPBOX is enclosed in a NEMA 3X box allowing it to be installed indoors or outdoors, NOT to be installed under water.

The Satic Power Perfect Box should be placed on a dedicated, 2-pole 15 amp breaker (not included with purchase).
DO NOT OPEN:
THERE ARE NO SERVICEABLE PARTS. LICENSED ELECTRICIAN MAY OPEN TO CHECK BLUE LIGHT AND RECORD SERIAL #.
Installation Instructions

Warranty
The Satic Power Perfect Box has a warranty from date of installation. Please fill out the warranty card completely and return it after installation is complete.
