Standard Power Perfect Box Technical Specifications
Standard Power Perfect Box Highlights
-
120/208, 120/240 Volt Single Split-Phase Electricity Conditioner
-
Low Power Losses, < 0.5 Watts per 1000 VAr
-
Operating Temperature Range of -55°C to +90°C
-
General Enclosure: NEMA 3X Indoor/Outdoor
-
Electrical Harmonics Elimination (THD Reduction)
-
Three-Way Electrical Protection
-
Self-healing metalized Harmonic Rectifiers
-
Robust Tri-circuit Integrated Surge Protection
-
EMI/RFI Noise Reduction 0-50 dB
-
Wire Rating: 600 Volts, THHN/ MTW/ THWN-2
-
Box Size 8” X 8” X 4”
-
EMF/EMR Reduction
-
Voltage Moderation
-
Power Factor Compensation
-
Surge Suppression
Standard Power Perfect Box Characteristics
Max AC Voltage (Charge Potential): 300 Volts
Single Split-Phase Voltages Available: 120/240, 120 / 208 Volts (300 Volt L1 to L2 MAX)
Input Power Frequency: 50/60 Hz
Wire Rating: 600 Volts, MTW / THHN/ THWN-2
Current Requirements @ 120/208 Volts: L1 2.45 Amps
(Terminated to a Double Pole 15A Breaker): L2 2.45 Amps
N 0.95 Amps
Operating Temperature: -55°C to +90°C
Operating Humidity: 5% to 95%, Noncondensing
Operating Altitude: Up to 16,000 ft (5000m)
Seismic Withstand Capability (Meet or Exceed Specifications): IBC 2006, CBC 2007, & UBC Zone 4
Harmonic Rectifier Circuit Qualities
Total Unit Reactive Power @ 300 V (L1-L2 + L1-N + L2-N): 60 μF
Per Circuit Reactive Power @ 300 V (L1-L2 & L1-N & L2-N): 20 μF
Reactive Bank Composition: 18 PFC Modules
Harmonic Dissipations - PFC Module Specs
Tangent of Loss Angle; C > 1 μF at 1kHz: <= 30 * 10
Rated Voltage Pulse Slope (dV/dt); P=22.5: 150 V/ μs
RC Between Leads: >5000 s
Withstanding(DC) Voltage (Cut-off Current 10 mA): 1850 V
EMI/RMI Filtering Attenuation: Up to 50 dB from 10 kHz to 100 MHz
Protection Modes: (L1-L2 + L1-N + L2-N)
-4
Surge Suppression
Voltage (Continuous) 250 Volts
424 Volts
(Max Clamping) 650 Volts
Current (Peak Surge) 6.5 kAmps
(Rating) 6500 Amps
​
Transient Dissipation Potential Each Circuit (Surge Energy): 1300 Joules/μs
Protection Modes (Tri-Circuit Integration): (L1-L2 & L1-N & L2-N)
RMS
DC
RMS
Description/Code
-
Made in Montana
-
Made in United States
-
UL / CSA - E337361 - Open Energy Management Equipment 3ZJ9
-
FCC - Approved (UL Tested for Compliance)
-
CE - Low Voltage Directive 2006/95/EC
-
CE - Electromagnetic Compatibility (EMC) 2004/108/EC
-
RoHS - Lead Free - Restriction of Hazardous Substances
Standard Power Perfect Box Accreditations
